61/164
Available Q24M Accessories - Overview
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Mx2wire Media Converter (MX-2wire-Set-PW)
The Mx2wire system allows you to set up an Ethernet
Network with PoE over paired telephone wires. This allows
an existing two-core analog telephone line to be put to use
to connect a 10/100 MB Ethernet device (e.g. PC, WLAN,
network camera, IP telephone or IP door station). The
achievable data rate is up to 40 Mbps. Around 15 Mbps
can be reached over 500 m of bell wire.
An identical Mx2wire device is placed at the beginning and
the end of the line. Configuration as sender or receiver is
automatic. The Mx2wire nodes are supplied with power
by the feeding network cable. The connected devices may
be supplied with up to 8 watt over PoE, as the injected
PoE signal is transmitted parallel to the network signal.
The Mx2wire is delivered in a standard wall outlet frame
available in dierent designs, but may also be used with
the included on-wall outlet.
To Next Page
Loading...
