Topology Configuration
40
04/99 AWB 2700-1311 GB
Slaves without CPU
In this case, the slave (basic unit) and all its local
components are described in the master
configuration.
Figure 18: Configuration of a slave without CPU in the
master configuration
How are the stations configured?
The topology configuration contains an address for
every station. This address is determined by the
station’s position in the network and is made up of
the line, station and module number. It is
automatically allocated by the topology configurator:
Line number
Line numbers are allocated from left to right in
ascending order. The first line is given number “1”
and the master is always allocated line number “0”.
PS 4-341-MM1 LE 4 LE 4 LE 4
EM 4-201-DX2
LE 4
LE 4
H1311g.bk Seite 40 Freitag, 4. Juni 1999 1:12 13