Moffat turbofan E32SUBC - Page 66

12
References
62
Revision 3
© Moffat Ltd, September 2009
E32SUBC OVEN and PROOFER
E32SUBC - CONTROLLER SETTING REFERENCE GUIDE
Entering programming modes
1. Hold the 'P' key for 3 seconds.
2. Display shows programming menu screen.
3. Scroll up/down to required and press P key to access.
4. Enter password as per below.
Service Settings
Password Pvr#2, Ov#3, Pvr#2, Pvr#3 Setting range Default Setting
Temp offset Temp offset oven probe +/-11 -1
Temp offset prover air probe +/-11
+4
Temp offset prover water probe +/-11
+2
Diagnostics Oven probe temp displays current probe reading
Proofer probe air temp displays current probe reading
Proofer probe water temp displays current probe reading
Door switch Open/Close displays door switch status
Float switch Open/Close displays water tank float switch status
Humidity probe reading displays current probe humidity reading
Oven heat relay output status displays ON or OFF status
Oven power ON relay output status displays ON or OFF status
Proofer heat relay output status displays ON or OFF status
Proofer water heater relay output
status displays ON or OFF status
Proofer power ON relay output status displays ON or OFF status
Oven fan realy output status
displays ON or OFF status