44
DEU
ENG
NDL
FRA
ITA
ESP
of the target value at the room control unit. The actual value is displayed.
The setting applies globally for all room control units taught-in at the corresponding base with
operating lock activated.
The comfort programs remain active.
The operating lock (hotel function) can be set via the MicroSD card, via the web surface of the
Ethernet variant or via the service level of the RBG display (parameter 171).
¾ Activate the operating lock (hotel function) “Restricted operation” using a Room control unit
Display taught-in to the base (parameter 171 = 1).
¾ Activate the code-protected operating lock (child safety lock) individually at every desired
Room control unit Display of the base (parameter 030 = 1).
Note: The standard password “0000” of the previously activated operating lock (child safety lock)
can be changed with parameter 031.
¾ Activate “Child safety lock” via the padlock symbol in the lifestyle functions individually for
each room control unit.
Cancellation via pressing and holding the rotary control and the previously defined password.
To Next Page
Loading...