3. Getting Started
Table 3.4 (Continued) MENU Button and Menus
Menu Selection Purpose/Action
▷ ▷ Clear Resets all Ω/(unit) settings.
Math See Table 3.2: Math Menu.
Settings
▷ Meas. Settings See Meas. Settings under Measurement menu above.
▷ Save Trace Default Name Allows creation of default name for saved traces.
When a trace is saved, the dialog box is autofilled with
this name. Can also choose to automatically append a
revision number or timestamp to default name.
▷ Network Settings
▷ ▷ Static Network Settings Modifies static network settings (if DHCP inactive):
▷ ▷ ▷ IP Address . . . . . . . . . . . . . . . . . . . IP address (xxx.xxx.xxx.xxx)
▷ ▷ ▷ Netmask . . . . . . . . . . . . . . . . . . . . . . . Subnet for CT100B
▷ ▷ ▷ Gateway (optional) . . . . . . . . . . Gateway server setting
▷ ▷ ▷ Nameserver 1 and 2
(optional). . . . . . . . . . . . . . . . . . . . Nameserver settings
▷ ▷ DHCP on/off Toggles DHCP on/off.
▷ ▷ Show IP Config. Displays current Ethernet configuration.
▷ ▷ Web Server On/Off Toggles the internal web server on and off. The web
server provides .csv format files, screen-capture
bitmaps, and the ability to remotely access the device.
See Section 4.15 for more details on accessing data
using web export. [Note: See Section 6 for more
information on using CT Viewer 2 to acquire TDR
traces. See www.mohrtm.com for information on the
CT100B Python programming library and binary
programming protocol for Ethernet CT100B interface.]
▷ ▷ Selected .csv Options Opens a dialog for adding additional data columns in
the .csv trace export file.
▷ ▷ Set Listen Ports This dialog box allows you to define a different RPC
port # and a different Remote Control Port # for use
with the CT Viewer 2 application (default 12347).
▷ ▷ SP232 Protocol On/Off Toggles SP232 emulation on/off. A USB to serial
adapter is required for SP232 emulation. Press this
button while emulation is on to switch the baud rate.
▷ Power
▷ ▷ DC Power Save Sets the inactivity timeout for power save mode while
the device is running on external DC supply.
CT100B TDR Cable Analyzers Operator’s Manual 27
To Next Page
Loading...