4. Operating Instructions
Figure 4.27. The List Annotations selection brings up a list of annotations associated with
a trace.
From this box, the annotation text can be viewed or modified or an annotation can be deleted.
An annotation for a specific point will show up as an arrow on the trace at that point. Annotations
for a range of points show up as arrows at the starting and ending points of the range, connected
by a line. See Figure 4.28.
Figure 4.28. A trace with annotations for a specific point and a range of values. These
show up as arrows on the trace.
When an annotation is created, the multifunction indicator at the top of the screen will
automatically change to show the name of the currently selected annotation (Figure 4.29). Use the
M-FUNCTION knob to select the next or previous annotation.
CT100B TDR Cable Analyzers Operator’s Manual 59
To Next Page
Loading...