Molecular Devices ImageXpress Pico User Manual

ImageXpress Pico Automated Cell Imaging System Installation Guide
66 5063666 K
Item Description
Reading Modes Fluorescence
Transmitted Light (Brightfield)
Colorimetric
Objectives 4x
10x
20x (optional)
40x (optional)
63x (optional)
Fluorescence Color Channels FITC
DAPI (optional)
TRITC (optional)
CY5 (optional)
Texas Red (optional)
CFP (optional)
Environmental Control CO
2
:1% to 15% (optional)
O
2
:1% to 15% (optional)
Humidity:85% (optional)
Temperature Control without environmental control cassette
6°C (11°F) above ambient up to 40°C (104°F)
with environmental control cassette
8°C (14°F) above ambient up to 40°C (104°F)
Ambient Operating Conditions Temperature (general use without environmental control): 18°C
to 30°C (64°F to 86°F)
Temperature (when using temperature control):18°C to 28°C
(64°F to 82°F); ambient temperature must be at least 8°C
(14°F)below the target temperature
Relative Humidity: 20% to 75% (non-condensing)
Ambient Storage Conditions Temperature: -20°C to +60°C (-4°F to 140°F)
Relative Humidity: 15% to 75% (non-condensing)
Altitude Restrictions Up to 2000m (6,562ft)
IEC Installation Category II
Pollution Degree 2
Data Connection Two (2) Ethernet ports
IEC Ingress Protection IP20

Molecular Devices ImageXpress Pico Specifications

General

Brand	Molecular Devices
Model	ImageXpress Pico
Category	Laboratory Equipment
Language	English