Molecular Devices ImageXpress Pico User Manual

Chapter 2: Setting Up the ImageXpressPico System
5063666 K 31
Connecting Cables
The power cord and Ethernet cable connect to the ports on the rear of the instrument.
The Ethernet port enables you to connect the instrument to the host computer running the
CellReporterXpress software (in a standalone configuration) or to your network (in a network
configuration or server configuration). When the instrument is connected to your network, other
computers on the network can connect to the host computer as remote clients. You can also
distribute functionality across several computers on the network, using more powerful
computers to perform analysis operations and storage operations.
See the CellReporterXpress Installation Guide for details on these configurations and
guidelines for setting up a system that meets your needs.
The package contains the following cables:
Cable Description
Two (2) CAT6 Ethernet cable, 2m (6.6ft)
One of the following:
Power Cord for USA/Canada, 2.29m (7.5ft)
Power Cord for Europe, 1.96m (6.4ft)
Power Cord for China, 2.5m (8.5ft)
The following shows the bottom rear of the instrument:

Molecular Devices ImageXpress Pico Specifications

General

Brand	Molecular Devices
Model	ImageXpress Pico
Category	Laboratory Equipment
Language	English