molex BradControl HarshIO 600 eIP

To Next Page

To Previous Page

HarshIO 600 eIP



IP67 Digital I/O Modules for EtherNet/IP

16 Inputs module versions

Byte

Offset

Bit 15

Bit 14

Bit 13

Bit 12

Bit 11

Bit 10

Bit 9

Bit 8

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

Input Data (Assembly #103), Size: 8 bytes

Data

n/u

Diag

n/u

Input Data

I15

I14

I13

I12

I11

I10

Port Status

n/u

Port Status

n/u

PS P7

PS P6

PS P5

PS P4

PS P3

PS P2

PS P1

PS P0

Output data (Assembly #104), Size: 2 bytes

Output Data

n/u

Configuration (Assembly #106), Size: 16 bytes

Data

n/u

Data

n/u

Data

n/u

Data

n/u

Data

n/u

Data

n/u

Data

n/u

Data

n/u

n/u: Not used

Ix: Input channel x

PS: Port Status (short circuit detected on a port driving Input channels)

QC: Quick Connect, 1 = Enable; 0 = Disable

Diag UB: Diagnostic Logic/Input power supply (UB)

 Set to 1, if UB is < 14.1 VDC

o All Outputs activated are de-energized

o All Outputs activated have diagnostic leds to RED

o All Outputs activated have Port Status (CS Ox) bit set to 1

 Set to 0, if UB is > 14.6 VDC

o All Outputs activated are energized

o All Outputs activated have diagnostic leds to GREEN

o All Outputs activated have Port Status (CS Ox) bit set to 0

Main Page

molex BradControl HarshIO 600 eIP - Page 29

Table of Contents

Related product manuals