17
Turning Your System ON Using Two Button/
Double Press
Your system may be programmed to quickly turn ON using either the
two button method or the double press method.
The two button method allows you to quickly turn your system ON by
pressing the AWAY, STAY, or NIGHT key and then pressing the Enter
key.
The double press method allows you to quickly turn your system ON by
pressing the AWAY, STAY, or NIGHT key twice.
Exit-ON (ZX400/ZX410 only)
This feature allows your system to turn ON automatically ten (10)
minutes after you leave the premises and no other activity is detected.
Your Control Station will display a visual countdown (an ‘A’ followed by
the number of minutes/seconds) and then sound an audible warning at
two (2) minutes and one (1) minute before the system turns ON. See
ZX400/ZX410 Programming - Cancelling Exit-ON For Today for
instructions on how to cancel this feature for the day.
Automatic-ON - (DO NOT enable for UL Listed Systems)
(ZX400/ZX410 only)
This feature turns your system ON at a scheduled time daily. Your
Control Station will periodically display a visual warning and sound an
audible warning each minute starting at ten (10) minutes before the
system turns ON. See ZX400/ZX410 Programming - Programming the
Automatic-ON Feature and Cancelling Automatic-ON For Today.
OPTIONAL FEATURES
O
P
T
I
O
N
E
N
A
B
L
E
D
O
P
T
I
O
N
E
N
A
B
L
E
D
O
P
T
I
O
N
E
N
A
B
L
E
D
To Next Page
Loading...
