39
5. Press . The Control Station will display the current setting.
6. Enter User ID (0 - 50, where 0 disables Latch Key
Monitoring).
7. Press to save selection and return to the location prompt.
B. Day(s) of Week to Monitor
To select the day(s) of the week you want to be monitored, add
together the values below for those days selected.
Value Day of the Week
1 Sunday
2 Monday
4 Tuesday
8 Wednesday
16 Thursday
32 Friday
64 Saturday
Example: To set up monitoring for Monday, Wednesday, and Friday,
add 2 + 8 + 32. Enter the value 42.
8. The Control Station will display:
Press (for location 2).
9. Press . The Control Station will display the current setting.
10. Enter new value (0 - 127) .
11. Press to save selection and return to the location prompt.
ENTER
ZX400/ZX410 PROGRAMMING
ENTER
2
ENTER
ENTER
To Next Page
Loading...
