3.3
76347-385 • 06-15
1. Safety control bar
Controls forward, stop, and reverse action of the feed wheels.
2. Safety cables
Reverses the feed when the cables are pulled. Important safety feature.
3. Yoke locking pin
Prevents accidental lowering of the top feed wheel when performing
maintenance. This is a critical safety lockout feature.
4. Yoke
Housing for the feed wheel.
5. Feed wheel hydraulic motor
Provides power to the feed wheel.
6. Hood locking pin
Secures hood and engages hood safety switch. Important safety
feature.
7. Manual swivel discharge handle
Used to manually rotate the discharge chute 360º.
8. Air filter housing
The air filter is located inside this housing. It protects the engine from
air-borne contaminates.
9. Engine control panel
Primary controls for the power unit.
10. Engine
Provides power to the chipper. Available in a variety of manufacturers and
models.
11. Clutch and clutch handle
Used to engage and disengage power to the chipper.
12. Battery box
Container where the battery is stored.
13. Engine drive belt guard
Protects the operator during operation of the machine. The guard must
be attached during operation.
14. Discharge locking pin
Locks discharge chute in position.
15. Yoke spring
Aides in providing down pressure to the yoke wheel.
16. Infeed
Allows unrestricted flow of material and keeps operator away from
feed system.
Features and Function • The Basics • Rght View
To Next Page
Loading...