3.23
NOTE
76347-385 • 06-15
Safety
Loose clothing, long hair, dangling jewelry may get
entangled in moving parts and cause serious injury. Do not
get near or wear loose items near moving parts.
The muffler becomes hot during operation. Contact with
the muffler may cause burns.
Removing the radiator cap while the engine is hot can cause
the coolant to spray out, seriously scalding you. Always let
the engine cool down before removing the radiator cap.
WARNING!
Follow the manufacturers recommended procedure when using starting
aids in cold temperatures.
Use of plain water alone as a coolant will result in liner pitting and
corrosion. Always have the proper mix of coolant. Artificially softened
water should not be used in the radiator.
Moisture in the fuel system has an impact on engine performance and
results in corrosion.
Function
The engine is the source of power for the machine.
This chipper has many options for its engine. Consult the engine
manufacturers manual for the safety, use and maintenance of your specific
engine. The engine drive belt, sheaves, air filter, and muffler will vary with
each model. See the Parts section for part numbers on the engines and their
components.
Features and Function • Components • Engine
To Next Page
Loading...