59
บᑥ
OILS
4 บᑥ
OILS
4-1 ܟบ
Recommended Oils
ፈบɂ˩᚜ɁܟบɥΈႊȪȹȢȳȨȗǿܟบ۶Ɂบ
ɥΈႊȬɞȻǾൡಽట఼ɁᑤɥȠҋȮȽȗکնȟȕɝɑ
Ȭǿ
Use the following recommended oils. Using other oils may
degrade the machine performance.
7 า 7 CAUTION
ȧΈႊȾȽɞบᑥ᭒ȾȷȗȹɂǾɴɮʵʫ˂ɵ˂Ɂ MSDS
ᴥԇޙ࿎ኄާпʑ˂ʉʁ˂ʒᴦɥ᠔оЫȞɜȝറᒲᡵȺо
ɁșțǾȝറɁȾȝȗȹͽഈၥہɁᆬίɗίከȝɛ
ɆࣔȾᩜȪȹɁከျɥᚐȶȹȢȳȨȗǿMSDS ȾᜤᢐȨɟ
ȹȗɞͶɋɁᬭȾȷȗȹɕԚґȧาȢȳȨȗǿ
Receive the MSDS (MATERIAL SAFETY DATA SHEET)
from the lubricant manufacturer directly yourself as the
customer. Work environment management and the
storage and disposal of oils are the sole responsibility of
the customer. Take careful note of the effects on the
human body described in the MSDS.
2 าᜤ 2 NOTE
ʫ˂ɵ˂ɁบɥຉնȪȽȗȺȢȳȨȗǿ Do not mix different brand oils.
4-2 ɴɮʵʫ˂ɵ˂ߦ᚜
Oil Equivalents
ՎᐎɑȺȾյɴɮʵʫ˂ɵ˂Ɂบߦ᚜ɥ˩ȾᇉȪɑȬǿ
ܟบ۶ɁบȾȷȗȹɂᤆӦ࿑ɥίᜳȬɞɕɁȺɂȕɝ
ɑȮɦǿ
The following table shows equivalent product names for your
information. The oils other than recommended oils are not
guaranteed on the dynamic characteristics.
ፈบኙ ሗҝ บᦀᴥLᴦ ૰֚ఙ ፈบ֚ఙ
༁໙บʰʕʍʒʉʽɹ
ல֪ʁɱʵᆀบ
ʁɱʵʒʔ S3 M 68
4—
ᛵȾȫȹ
บ٢ʰʕʍʒʉʽɹ
ҋбᒾႇ
ʊʟʕ˂ʙɮʓʷɰʴʍɹʟ
ʵɮʓ 32
10
ሜЄᩖ
2000 ᩖ
—
ѯԵบຣ࣊ɽʽʒʷ˂ʳʉʽ
ɹ
ҋбᒾႇ
ʊʟʕ˂ʃ˂ʛ˂ʨʵʋɴɮ
ʵ 2M
10
ሜЄᩖ
2000 ᩖ
—
ʋʭʍɹ
ல֪ʁɱʵᆀบ
ɬʵʚʕɬ HDX
ʋʭʍɹࠖɁᝢంՎྃ
ِްળɟඨɔɁʷ˂ʳʟɳʷ
ɬᴥɴʡʁʱʽᴦ
ɬʵʚʕɬɺʴ˂ʃ No.2 ɑ
Ȳɂᄾֿ
ᤛᦀ
—
ුஓ
Lubricating Point Type Quantity (L)
Oil Change Inter-
val
Replenishing
Interval
Lubricating Unit Tank
Shell
Shell Tonna S3 M 68
4 — As required
Hydraulic Unit Tank
Idemitsu
Daphne Hydraulic Fluid 32
10
Every 2000 hours
of operation
—
Oil Temperature Controller
Tank
Idemitsu
Daphne Super Multi Oil 2M
10
Every 2000 hours
of operation
—
Chuck
Shell
Alvania HDX
Refer to the chuck manufacturer's manual
Roller Follower of the Steady
Rest (Option)
Alvania Grease No. 2 or
equivalent
As required — Everyday
To Next Page
Loading...
Need help?
General
