Motic BA310E - Table of Contents

5
TABLE OF CONTENTS
SECTION PAGE
1. NOMENCLATURE 7
2. SETTING UP THE INSTRUMENT 9
2.1 Operating environment 9
3. ASSEMBLING THE MICROSCOPE 10
3.1 Verifying input voltage 10
3.2 Illumination 10
3.2.1 Halogen lamp 10
3.2.2 LED 10
3.3 Reckless stage 11
3.4 Specimen holder 11
3.5 Objectives 11
3.6 Condenser 11
3.7 Eyepiece tube 12
3.8 Eyepieces 12
3.9 Filters 13
3.10 Power cord 14
4. USAGE OF MICROSCOPE COMPONENTS 15
4.1 Coarse and fine focusing 15
4.2 Coarse focus torque adjustment 15
4.3 Coarse focus quick stop 16
4.4 Stage upper limit stop adjustment 16
4.5 Beam splitter lever 17
4.6 Interpupillary distance adjustment 17
4.7 Diopter adjustment 18
4.8 Centering the condenser 18
4.9 Use of aperture diaphragm 19
4.10 Use of field diaphragm 19
4.11 Brightness and contrast adjustment 19