User Guide - v11 35
• Fast
• Fastest
Power Saving
Use this feature to set the power saving options of the camera:
• Auto Saving: Reduces power to the pan and tilt motors when the camera is
stationary.
• Full Power: Maintains full power to the motors at all times (default).
Static PTZ Mode
Select this option to disable all pan, tilt and zoom functionality except the washer position
preset and the park mode preset. The default is Off.
Lighting
Use these options to choose how the camera uses its white lights to illuminate an area at low
light.
White Lamps
If the camera variant is fitted with white lamps, set White Lamps to On (default). Otherwise,
set it to Off.
OnMotion: White lights are turned on with manual PAN or TILT operation only.This is only
applicable when it is dark and the night settings are configured for no illumination or IR
illumination.
The lights remain on for the White Timer period or a minimum of 10 seconds if the period is
set to Off.
Zoom, Focus, Iris, Preset Seeks, Tours, Mimics and Home Function do NOT activate
this feature.
White lights will remain on during PAN and TILT operation.
White lights will remain on after PAN and TILT operation for the White Timer activation
period.
The camera returns to its normal programmed night settings after the White Timer activation
period has elapsed.
White light exclusion zones can be configured as normal and will override the above settings,
disabling white lighting in excluded areas.
White Timer
If you select a time value for White Timer other than Off, White Lamps automatically switch
Off when the time runs out.
The White Timer values are: Off, 1min (default), 2min, 5min, 10min, 15min, 30min and
60min.
Set White Timer to Off to prevent the White Lamps from turning Off automatically.
Exclusion Zones
The white exclusion zone is set to the pan positions between Preset 151 (left) and Preset 152
(right).
HD Interceptor Camera - Specialized Range 5 Configuration
To Next Page
Loading...
Need help?
General
