20 October 4, 2004 6809490A77-O
Disassembly A1000
Removing and Replacing the USIM
The UMTS Subscriber Identity Module (USIM) contains the phone number, service
details, and phonebook/message memory. The phone can use GSM SIM cards, but
not all features will be available.
Do not bend or scratch the USIM card. Avoid exposing it to static electricity, water,
or dirt.
To Remove the USIM
1. Ensure the phone is off.
2. Remove the battery door.
3. Remove the battery.
4. Slide the USIM card holder to unlock it and lift it to open.
5. Slide the USIM out of the USIM card holder.
To Replace the USIM
1. To replace the USIM, insert the USIM card in the card holder. The card notch
fits in the lower left corner, and the gold contacts face down.
2. Close the USIM card holder and slide it up to lock it in place.
Figure 6. Removing and Replacing the USIM Card
To Next Page
Loading...
