Motorola A1000 - Removing and Replacing the Joystick Assembly

28 October 4, 2004 6809490A77-O
Disassembly A1000
Removing and Replacing the Joystick Assembly
To Remove the Joystick Assembly
1. Ensure the phone is off.
2. Remove the battery door.
3. Remove the battery.
4. Remove the USIM.
5. Remove the rear housing.
6. Remove the transceiver board.
7. Disengage the locking tabs on either side of the joystick assembly.
Figure 14. Removing and Replacing the Joystick Assembly
Locking
Tab
Locking
Tab