6809490A77-O October 4, 2004 31
Level 1 and 2 Service Manual Disassembly
To Replace the Display Assembly
1. Align the display assembly with the transceiver board.
2. Snap the 2 display locking tabs into place.
3. Carefully press the display flex connector into the transceiver board display
connector.
4. Replace the joystick assembly, transceiver board, rear housing, USIM, battery,
and battery door as described in the procedures.
Figure 17. Removing the Display Assembly
Display
Assembly
Display Locking
Tab
ransceiver
Board
To Next Page
Loading...
