Motorola AP-51XX User Manual

AP-51xx Access Point Product Reference Guide
5-16
Packet types supported for the type filtering function include 16-bit DIX Ethernet types as
well as Motorola proprietary types. Select an Ethernet type from the drop down menu, or
enter the Ethernet type’s hexadecimal value. See your System Administrator if unsure of the
implication of adding or omitting a type from the list for either LAN1 or LAN2.
4. To optionally delete a type filtering selection from the list, highlight the packet type and click
the Delete button.
5. Click Apply to save any changes to the LAN1 or LAN2 Ethernet Type Filter Configuration
screen. Navigating away from the screen without clicking Apply results in all changes to the
screens being lost.
6. Click Cancel to securely exit the LAN1 or LAN2 Ethernet Type Filter Configuration screen
without saving your changes.
7. Click Logout to securely exit the Access Point applet. A prompt displays confirming the
logout before the applet is closed.
5.2 Configuring WAN Settings
A Wide Area Network (WAN) is a widely dispersed telecommunications network. The access point
includes one WAN port. The access point WAN port has its own MAC address. In a corporate
environment, the WAN port might connect to a larger corporate network. For a small business, the
WAN port might connect to a DSL or cable modem to access the Internet.
Use the WAN screen to set the WAN IP configuration and Point-to-Point Protocol over Ethernet
(PPPoE) parameters.
To configure WAN settings for the access point:
1. Select Network Configuration -> WAN from the access point menu tree.

Motorola AP-51XX Specifications

General

Brand	Motorola
Model	AP-51XX
Category	Wireless Access Point
Language	English