Monitoring Statistics
7-27
3. Click the Refresh button to update the data collections displayed without resetting the data
collections to zero.
4. Click the Echo Test button to display a screen for verifying the link with an associated MU.
For detailed information on conducting a ping test for an MUs, see Pinging Individual MUs
on page 7-30
.
5. Click the MU Authentication Statistics button to display a screen with detailed
authentication statistics for the an MU.
For information on individual MU authentication statistics, see MU Authentication Statistics
on page 7-31.
6. Click the MU Details button to display a screen with detailed statistics for a selected MU.
For detailed information on individual MU authentication statistics, see Viewing MU Details
on page 7-27.
7. Click the Clear All MU Stats button to reset each of the data collection counters to zero in
order to begin new data collections.
8. Click the Logout button to securely exit the Access Point applet. A prompt displays
confirming the logout before the applet is closed.
7.5.1 Viewing MU Details
Use the MU Details screen to display throughput, signal strength and transmit error information for
a specific MU associated with the access point.
The MU Details screen is separated into four fields; MU Properties, MU Traffic, MU Signal, and MU
Errors. The MU Properties field displays basic information such as hardware address, IP address,
and associated WLAN and AP. Reference the MU Traffic field for MU RF traffic and throughput data.
Use the RF Status field to reference information on RF signal averages from the target MU. The Error
field displays RF traffic errors based on retries, dropped packets and undecryptable packets. The MU
Details screen is view-only with no user configurable data fields.
To view details specific to an individual MU:
Hotspot Displays whether this radio is currently supporting a hotspot.
NOTE An echo test initiated from the access point MU Stats Summary screen
uses WNMP pings. Therefore, target clients that are not Motorola MUs
are unable to respond to the echo test.
To Next Page
Loading...
Need help?
General
