AP-51xx Access Point Product Reference Guide
5-38
Either the New MU ACL Policy or Edit MU ACL Policy screens display.
3. Assign a name to the new or edited ACL policy that represents an inclusion or exclusion
policy specific to a particular type of MU traffic you may want to use with a single or group
of WLANs. More than one WLAN can use the same ACL policy.
4. Configure the parameters within the Mobile Unit Access Control
List field to allow or
deny MU access to the access point.
The MU adoption list identifies MUs by their MAC address. The MAC address is the MU's
unique Media Access Control number printed on the device (for example, 00:09:5B:45:9B:07)
by the manufacturer. A maximum of 200 MU MAC addresses can be added to the New/Edit
MU ACL Policy screen.
Access for the listed
Mobile Units
Use the drop-down list to select Allow or Deny. This rule applies
to the MUs listed in the table. For example, if the adoption rule is
to Allow, access is granted for all MUs except those listed in the
table.
To Next Page
Loading...
