AP-51xx Access Point Product Reference Guide
6-56
The rogue detection interval is used in conjunction with Motorola MUs that identify themselves as
rogue detection capable to the access point. The detection interval defines how often the access
point requests these MUs to scan for a rogue AP. A shorter interval can affect the performance of the
MU, but it will also decrease the time it takes for the access point to scan for a rogue AP. A longer
interval will have less of an impact to the MU’s, but it will increase the amount of time used to detect
rogue APs. Therefore, the interval should be set according to the perceived risk of rogue devices and
the criticality of MU performance.
To configure Rogue AP detection for the access point:
1. Select Network Configuration -> Wireless -> Rogue AP Detection from the access
point menu tree.
CAUTION Using an antenna other than the Dual-Band Antenna (Part No.
ML-2452-APA2-01) could render the access point’s Rogue AP Detector
Mode feature inoperable. Contact your Motorola sales associate for
specific information.
!
To Next Page
Loading...
Need help?
General
