8-47
AP51xx>admin(network.wan.nat)> delete
Description:
Deletes NAT entries.
Syntax:
Example:
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index name prot start port end port internal ip translation port
-----------------------------------------------------------------------------
1 special tcp 20 21 192.168.42.16 21
admin(network.wan.nat)>delete 1 1
^
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index name prot start port end port internal ip translation port
-----------------------------------------------------------------------------
Related Commands:
For an overview of the NAT options available using the applet (GUI), see Configuring Network Address Translation (NAT) Settings on
page 5-21.
delete <idx> <entry> Deletes a specified NAT index entry <entry> associated with the WAN.
<idx> all Deletes all NAT entries associated with the WAN.
add Adds entries to the list of inbound NAT entries.
list Displays the list of inbound NAT entries.
To Next Page
Loading...
Need help?
General
