AP-51xx Access Point Product Reference Guide8-54
AP51xx>admin(network.wan.vpn)> list
Description: 
Lists VPN tunnel entries. 
Syntax: 
Example:
admin(network.wan.vpn)>list
-------------------------------------------------------------------------- 
Tunnel Name  Type  Remote IP/Mask  Remote Gateway  Local WAN IP
-------------------------------------------------------------------------- 
Eng2EngAnnex  Manual  192.168.32.2/24  192.168.33.1  192.168.24.198
SJSharkey  Manual  206.107.22.45/27  206.107.22.2  209.235.12.55
admin(network.wan.vpn)>list SJSharkey
--------------------------------------------------------------------------
Detail listing of VPN entry:
--------------------------------------------------------------------------
Name  : SJSharkey
Local Subnet  : 1
Tunnel Type  : Manual
Remote IP  : 206.107.22.45
Remote IP Mask  : 255.255.255.224
Remote Security Gateway  : 206.107.22.2
Local Security Gateway  : 209.239.160.55
AH Algorithm  : None
Encryption Type  : ESP
Encryption Algorithm  : DES
ESP Inbound SPI  : 0x00000100
ESP Outbound SPI  : 0x00000100 
For information on displaying VPN information using the applet (GUI), see Viewing VPN Status on page 6-50. 
list <cr> Lists all tunnel entries.
<name> Lists detailed information about tunnel named <name>. Note that the <name> must match case with the name of 
the VPN tunnel entry