8-143
AP51xx>admin(system)>restart
Description:
Restarts the access point access point.
Syntax:
Example:
admin(system)>restart
********************************WARNING***********************************
** Unsaved configuration changes will be lost when the access point is reset.
** Please be sure to save changes before resetting.
**************************************************************************
Are you sure you want to restart the AP-51xx?? (yes/no):
AP-51xx Boot Firmware Version 2.0.0.0-xxx
Copyright(c) Motorola 2007. All rights reserved.
Press escape key to run boot firmware ........
Power On Self Test
testing ram : pass
testing nor flash : pass
testing nand flash : pass
testing ethernet : pass
For information on restarting the access point using the applet (GUI), see Configuring System Settings on page 4-2.
restart Restarts the access point.
To Next Page
Loading...
Need help?
General
