8-145
AP51xx>admin(system)>set
Description:
Sets access point system parameters.
Syntax:
For information on configuring System Settings using the applet (GUI), see Configuring System Settings on page 4-2. Refer to
Appendix A for information on the two-character country codes.
set name <name> Sets the access point system name to <name> (1 to 59 characters). The access
point does not allow intermediate space characters between characters within
the system name. For example, “AP51xx sales” must be changed to
“AP51xxsales” to be a valid system name.
loc <loc> Sets the access point system location to <loc> (1 to 59 characters).
email <email> Sets the access point admin email address to <email> (1 to 59 characters).
cc <code> Sets the access point country code using two-letters <code>.
To Next Page
Loading...
