8-205
AP51xx>admin(system.radius.ldap)> set
Description:
Defines the LDAP parameters.
Syntax:
Example:
admin(system.radius.ldap)>set ipadr 157.235.121.12
admin(system.radius.ldap)>set port 203.21.37.18
admin(system.radius.ldap)>set binddn 123
admin(system.radius.ldap)>set basedn 203.21.37.19
admin(system.radius.ldap)>set passwd mudskipper
admin(system.radius.ldap)>set login muddy
admin(system.radius.ldap)>set pass_attr 123
admin(system.radius.ldap)>set groupname 0.0.0.0
admin(system.radius.ldap)>set filter 123
admin(system.radius.ldap)>set membership radiusGroupName
admin(system.radius.ldap)>
For information on configuring a Radius LDAP server using the applet (GUI), see Configuring LDAP Authentication on page 6-67.
set Defines the LDAP parameters.
ipadr Sets LDAP IP address.
port Sets LDAP server port.
binddn Sets LDAP bind distinguished name.
basedn Sets LDAP base distinguished name.
passwd Sets LDAP server password.
login Sets LDAP login attribute.
pass_attr Sets LDAP password attribute.
groupname Sets LDAP group name attribute.
filter Sets LDAP group membership filter.
membership Sets LDAP group membership attribute.
To Next Page
Loading...
Need help?
General
