Motorola APX 1500 - Page 117

Option Actions
b To modify the TX DPL or Rx DPL code of
the selected channel, press EDIT.
c Enter the required value.
Switching between Normal or Invert DPL
Operation
a To switch between normal and invert
DPL modes, press INVT.
Editing Tx NAC or Rx NAC
a To find Tx NAC or Rx NAC, press the
Left or Right navigation button.
b To modify the TX NAC or Rx NAC of the
selected channel, press EDIT.
c Perform one of the following actions
when entering the required value:
• To scroll through A, B, C, 2, multiple
press 2.
• To scroll through D, E, F, 3, multiple
press 3.
• To enter the digits, press 0, 1, 4–9.
Switching among Rx Analog, Mixed, and
Digital Mode
a To find Rx Type, press the Left or Right
navigation button.
b Press EDIT.
c Select ANALOG, MIXED, or DIGITAL by
pressing the Up or Down navigation but-
ton.
Switching between Tx Analog and Digital
Mode
a To find Rx Type, press the Left or Right
navigation button.
b To change the Rx mode of operation of
the selected channel, press EDIT.
c To switch to MIXED, press the Up or
Down navigation button.
d Press the Tx Type menu item.
e To change the Tx mode of operation of
the selected channel, press EDIT.
f To switch between ANALOG and DIGI-
TAL modes, press the Up or Down navi-
gation button.
Switching among Narrow, Medium, and
Wide Bandwidth
a To find Bandwidth, press the Left or
Right navigation button.
b To change the bandwidth of the selected
channel, press EDIT.
c To switch between 12.5 kHz, 20.0 kHz,
and 25.0 kHz, press the Up or Down
navigation button.
68012006035-FA
Chapter 33 : Front Panel Programming
117