Motorola APX 3000

Troubleshooting Charts: Bluetooth Failure – Pairing Issue 5-47
Bluetooth Failure – LCD Indication(Page 1)
Indication just after
power-up?
Power off radio. Open radio
and check the Main flex
connection with the
mainboard. Power on radio.
4
7
Clear All Pairing
Failed?
Yes
No
New or unknown
indication. Contact SW
for detail
No
Press the BT On/Off
soft-key button to trigger
message, reload radio
SW and retry.
Clear All Pairing
Failed?
No
HW BRD
ABSENT?
Yes
Yes
HW BRD
ABSENT?
BT ON
FAILED?
No
Yes
No
Yes
Try to enable BT again. If no
button is programmed to
turn BT on, use CPS to
assign for BT On/Off.
Recycle radio and retry.
BT ON FAILED?
5
No
BT ON
FAILED?
Reload SW in APX
radio. Enable BT and
recycle radio power.
Yes
No
Yes