Motorola APX 6000 - Bluetooth Failure

5-50 Troubleshooting Charts: Bluetooth Failure
Bluetooth Failure – Page 2 (Pairing Issue)
PAIRFAIL
on top
display?
Yes
No
PTT on headset
produces low-
tone from radio
Yes
No
Power off the POD headset, then
slightly turn and press firmly on the
earpiece connector to ensure it is
making good connection to the
POD. Power on the POD headset
and re-pair it with the APX radio.
Read codeplug. Write
Radio Wide-> Bluetooth->
reconnect timer to
‘immediate’. Reset Radio
and headset.
LF TX
Working?
See Section 6.17 &
Figure 6-72
See Section 6.17 &
Figure 6-66
See Section 6.17
See Section 6.17
Yes
No
LF RX
Working?
Yes
Yes
No
No
Replace
expansion
board
AUD DEV
UNPAIRED
on top display
in first 10
seconds?
Yes
No
Pairing
Success?
Yes
No
Resolved, radio never
released the pairing key of a
previous headset. Set up the
codeplug to have a menu item
for clearing BT pairing keys
and explain functionality.
Replace
expansion
board
Replace
expansion
board
BT TX
Working?
Yes
No
BT RX
Working?
Yes
No
Replace speaker module
in case BT antenna
is defective
Have you
already replaced
speaker module?
Yes
No
Replace expansion board
Intermittent Pairing
Failure?
3
2
7