5-54 Troubleshooting Charts: Bluetooth Failure
Bluetooth Failure – Page 6 (No Audio from Headset)
BT Audio
Reroute
programmed in
the code plug?
Yes
No
Connect radio to PC
and read the codeplug.
PTT on headset
produces low -
tone from radio
Yes
No
Determine what button is
programmed for BT audio reroute
from the codeplug and press it.
Audio heard
through SU
without headset
paired?
Yes
No
Audio heard
through BT
headset?
Yes
No
Resolved
Power off the POD headset, then slightly turn
and press firmly on the earpiece connector to
ensure it is making good connection to the
POD. Power on the POD headset and re-
pair it with the APX radio.
Audio heard
through BT
headset?
Yes
No
Go to RX RF/Vocon audio
flowchart (5.11 or External
Speaker Audio Out Failure)
Try a different headset. If still fail,
replace expansion board and retry.
Resolved
6
To Next Page
Loading...
