To Next PageTo Next Page
Need help?Do you have a question about the Motorola Astro Digital Saber III and is the answer not in the manual?
General| Brand | Motorola |
|---|---|
| Model | Astro Digital Saber III |
| Category | Portable Radio |
| Language | English |
Explains special notations like WARNING, CAUTION, and NOTES for safety.
Details the various switches, buttons, and indicators found on the radio.
Instructions for attaching and detaching radio antennas based on frequency band.
Step-by-step guide for installing and removing the radio's battery pack.
Procedures for attaching and removing the belt clip from the radio unit.
Steps to install and remove the cover protecting the radio's accessory connector.
Instructions for powering the radio on and off using the main control knob.
Guide on how to select the desired operating zone and channel on the radio.
How to listen for transmissions and talk using the radio's Push-To-Talk (PTT) switch.
Explains how to view and change entries in the radio's stored memory lists.
Covers features like radio lock, keypad tone muting, and time-out timer functions.
How to send status or message calls to a dispatcher for predefined conditions.
Procedures for initiating and exiting emergency alarms and calls from the radio.
Explains different types of individual calls like phone and private conversation.
How to override coded squelch (PL, DPL, Network ID) for channel monitoring.
Guides on activating repeaters for extended range communication and coverage.
Instructions for selecting between repeater and direct (talkaround) radio operation.
Overview of the radio's scanning feature, including different scan list types.
Explains different squelch modes like PL, DPL, Network ID, and carrier squelch.
Details the Smart PTT feature to prevent users from talking over ongoing conversations.
How the dispatcher can reassign radios to special channels for communication.
Procedure to notify the dispatcher for a new dynamic-regrouping channel assignment.
Explains how radios can be enabled or disabled for channel changes by the dispatcher.
How to view the radio ID number of the station currently being received.
Information on automatically sending the radio's ID during transmissions.
Details on using secure voice and clear transmissions for radio operation.
Procedures for loading and erasing encryption keys using the radio.
How to choose between high and low transmit power levels for messages.
Covers trunking system controls like Busy Override and Dispatcher-Interrupt.
Describes radio behavior when a trunking system experiences a complete failure.
How the radio indicates and behaves when it is out of system coverage range.
How to lock the radio to a specific site to prevent roaming among talkgroup sites.
Describes radio behavior when a zone dispatcher loses communication with a site.
How to view and manually change the radio's current operating site.
Table describing various sound alerts, their names, and the conditions they indicate.
Definitions of common terms and acronyms used throughout the manual.
Explains the meaning of various symbols displayed on the radio's screen.
Instructions for charging and proper recycling or disposal of Ni-Cd batteries.
Advice for troubleshooting common radio problems and performing basic checks.
Guidelines for proper cleaning and handling of the radio to ensure longevity.
Warnings and precautions regarding installation of communication equipment near vehicle air bags.
