42
Common Radio Features
Repeater/Direct
The repeater/direct feature allows you to bypass the repeater and talk directly
to another radio. This is known as DIRECT operation or talkaround operation.
The transmit frequency is the same as the receive frequency.
In REPEATER operation, you talk through the repeater, which increases the
radio’s operating range. The transmit frequency is not the same as the receive
frequency.
• Selecting Repeater or Direct Operation
1a. Press until appears
on the display.
2. Press directly below .
3. The display will show the current operation for a few seconds and then
the two possible operations.
4. Press below the desired operation ( or ).
Pressing or the PTT Switch will exit this display menu
without changing the current operation
HOME
HOME
OR
Notes
HOME
1b. Place the Repeater/Direct
Switch (if programmed, see
page 2) in the “repeater”
position or the “direct”
position.
7
9
5
3
1
1
A
See page 2
for your
radio’s
feature-
control
programming.
OR
Common Radio Features Page 42 Wednesday, April 10, 1996 12:32 PM
To Next Page
Loading...
Need help?
General
