General Radio Operation
27
• Muting the Keypad Tones
The radio’s keypad tones, normally heard each time a keypad key is
pressed, can be turned off (muted) or on (unmuted) at your discretion.
Muting Keypad Tones Using the Keypad-Mute Switch:
The Keypad-Mute Switch is programmable
through radio service software.
To turn the keypad tones off, put the Keypad-Mute
Switch in the “tones off” position.
To turn the keypad tones on for normal operation,
put the Keypad-Mute Switch in the “tones on”
position.
Muting Keypad Tones Using the Softkey Feature:
1. Press until the softkey appears on the
display.
2. Press directly below .
3. The display changes to show the current mute state: “TONES ON” =
tones unmuted; “TONES OFF” = tones muted.
4. Press below the desired mute state ( or ).
Pressing or the PTT Switch will exit this display menu
without changing the keypad tones muting selection.
7
9
5
3
1
1
A
See page 2
for your
radio’s
feature-
control
programming.
Note
OR
Note
HOME
General Radio Operation Page 27 Wednesday, April 10, 1996 12:19 PM
To Next Page
Loading...
Need help?
General
