60
Special Radio Features
Selectable Power-Level
This feature allows you to select the power level at which your radio will
transmit messages.
The radio will always turn on to the default setting as determined
through radio service software.
1a. Press until the softkey
appears on the display.
2. Press directly below .
3. The display changes to show the current power-level state.
4. Press directly below the desired condition. The new transmit
power-level is saved, and your radio returns to the home display.
= shorter transmitting distance; conserves battery life
= longer transmitting distance; lessens battery life
Pressing or the PTT Switch will exit this display menu
without changing the power selection.
Note
Note
HOME
OR
1b. Press the TX Power-Level
Switch (if programmed, see
page 2). This will take you
directly to step 3.
7
9
5
3
1
1
A
See page 2
for your
radio’s
feature-
control
programming
Special Radio Features Page 60 Wednesday, April 10, 1996 12:47 PM
To Next Page
Loading...
Need help?
General
