30
Common Radio Features
3. The last acknowledged status call or the first message in the message list
will be displayed.
If no status has been acknowledged, the first status in the status
list will be displayed.
4a. Scroll through the list by pressing
or until you locate
the predefined condition you wish
to send.
5. When you locate the condition you want to send,
press the
PTT Switch
.
6. Upon receipt of the data call, the dispatcher will
transmit an acknowledge to your radio. Your radio
will then beep four times, display “ACKNOWLEDGE,”
and then return to normal dispatch operation.
If the system does not acknowledge the data call, your radio will
alternately display “NO ACKNOWLEDGE” and the currently selected
predefined condition.
7. Press to exit the data-call feature and return to the home display.
• While the data-call feature is selected, you will not hear normal radio
communications.
• If the data-call feature ( or ) is selected and no activity occurs for
six seconds, an alert tone will sound to indicate to you that the data-call
feature is active. The alert tone will stop when or the
PTT Switch
is
pressed.
Note
FIRST
LAST
LIST
Forward
FIRST
LAST
Backward
LIST
HOME
Notes
HOME
4b. Go directly to a specific
predefined condition in the
list by entering the number
that corresponds to that
condition’s placement in the
list.
1
4GHI
7PRS 8TUV
0
2
ABC
5JKL
3DEF
6MNO
9WXY
OR
Common Radio Features Page 30 Wednesday, April 10, 1996 12:32 PM
To Next Page
Loading...
Need help?
General
