Common Radio Features
47
6a. Press below the desired
state ( or ).
= add currently displayed
channel to the scan list
= delete currently displayed
channel from the scan list
Each press of the softkey-related button, or the
programmed Select Button (see page 2), will cause one of the
following to occur:
• The scan indicator ( ) will appear to indicate that this
channel has been added to the scan list.
• A “•” will be displayed next to the scan indicator ( ) to
indicate that this channel is the priority-two channel.
• The scan indicator will turn off to indicate that this channel
has been removed from the scan list.
Notes
OR
6b. Press the Select Button to
change the scan-list status of
the currently displayed
channel.
7
9
5
3
1
1
A
See page 2
for your
radio’s
feature-
control
programming.
Common Radio Features Page 47 Wednesday, April 10, 1996 12:32 PM
To Next Page
Loading...
Need help?
General
