58
Special Radio Features
4a. Press or to scroll
through the encryption keys.
If an erased key is selected, the key name will be alternated with
“ERASED KEY.”
5. Press directly below the desired softkey, or if you did step 4b,
press or to scroll through the menu selections.
or “PRESET” = selects the preset or default encryption key.
= saves the newly-selected key and returns to the home display.
6. Press , the PTT Switch, the softkey-related button, or turn
the 16-Position Select Knob to exit this menu. If the selected key is
erased, “KEY FAIL” will be displayed and a momentary keyfail tone will
be generated.
Index Selection
The select-an-index feature allows you to select one or more groups of
several encryption keys from among the available keys stored in the radio.
For example, you could have a group of three keys structured to one index,
and another group of three different keys structured to another index; by
changing indices, you would automatically switch from one set of keys to
the other. Every channel to which one of the original keys was tied to will
now have the equivalent new key instead. Indexing allows the key-
management controller to remotely change the keys within the index,
that is not currently being used, without disrupting operation of the radio.
1. Press until the softkey appears on the display.
2. Press directly below .
3. The display changes to show the last user-selected and stored index and
the available index softkey selections.
Note
HOME
OR
4b. Enter the number of the
desired index.
Special Radio Features Page 58 Wednesday, April 10, 1996 12:47 PM
To Next Page
Loading...
Need help?
General
