EasyManua.ls Logo

Motorola Moto e6 - Page 198

Motorola Moto e6
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Choose your network operator (carrier).
5. Wait 30 seconds for the network to refresh the signal.
8. Remove your SIM card and reinsert.
9. Use
safe mode to see if apps that you have installed are causing the issue and uninstall as
needed.
10.
Reset the phone.
Have signal, but can’t make calls
1. Turn your phone off and then on again.
Press and hold the Power button, then touch Power off. Then turn it on to establish a new
connection with the network.
2. Clear the cache for the Phone app.
3. Use Safe mode to see if apps you installed are causing the issue and uninstall as needed.
4. Check if a software update is available for your phone.
5. Reset the phone.
Phone doesn't ring or ring loud enough
1. Check your volume setting.
2.
Look for
in your
status bar. If you see it:
Open quick settings and touch
to turn Do not disturb off. Your phone will ring for
incoming calls.
Make sure your phone is set to screen calls at the appropriate times.
3. Check that your
ringtone is not set to None.
4. Is your phone connected with a Bluetooth device? If so, all audio is routed to the Bluetooth
device.
5. If you're using a ringtone that you installed, try using a ringtone that came with the phone.
6. Use Safe mode to see if apps you installed are causing the issue and uninstall as needed.
Begin with application types like launchers, task killers, or anti-virus apps.
Can't answer ringing phone
1. Clear the data for the Phone app.
Touch & hold
, then touch > Storage >
Clear storage.
Fix a problem : Call and SIM issues 189

Table of Contents

Related product manuals