Preparing Your Radio for Use
English
5
Attaching the Accessory Connector
The accessory connector is
to be secured to the
universal connector on the
antenna side of the radio.
To attach the accessory
connector, refer to the steps
shown in the diagram.
To remove the accessory
connector, refer to the steps
shown in the diagram.
Powering Up the Radio
Rotate the On/Off/Volume
Control Knob clockwise
until you hear a click. You
see MOTOTRBO (TM) on the
radio’s display momentarily,
followed by a welcome
message.
The LED lights up solid
green and the Home screen
lights up if the backlight
setting is set to turn on
automatically.
1
2
3
2
3
1
LED
Indicator
LKP_APAC.book Page 5 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...