English
59
3 < or > to Inbox and press e to select.
4 < or > to the required message and press e to
select.
A subject line may be shown if the message is from an
e-mail application.
5 Press e once more to access the sub-menu.
6 < or > to Delete and press e to select.
7 < or > to Yes and press e to select.
8 The display shows positive mini notice.
9 The screen returns to the Inbox.
Deleting All Text Messages from the Inbox
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Messages and press e to select.
3 < or > to Inbox and press e to select.
4 < or > to Delete All and press e to select.
5 < or > to Yes and press e to select.
6 The display shows positive mini notice.
When you select the Inbox and it contains no text messages,
the display shows
List Empty
.
Analog Message Encode
Your radio is able to send preprogrammed messages from the
Message list to a radio alias or to the dispatcher.
Sending MDC Message Encode to Dispatcher
Procedure:
1 < or > to Message and press e to select.
2 < or > to Quick Text and press e to select.
3 < or > to the required message. Press e to send.
4 The display shows transitional mini notice, confirming your
message is being sent.
5 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
LKP_APAC.book Page 59 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...