Making and Receiving Calls
English
25
4 If successful:
A tone sounds and the display shows Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 3
or wait for the telephone user to end the call.
If Phone Call capability is not enabled in your radio, the display
shows
Unavailable
and your radio mutes the call. Your radio
returns to the previous screen when the call ends.
Phone Call as Group Call
Procedure:
When you receive a Phone Call as a Group Call:
1 The Phone Group Call icon appears in the top right corner.
The display shows the group alias and Phone Call.
2 Press the PTT button to talk and release to listen.
3 Press d to end the call.
The display shows Ending Phone Call.
4 If successful:
A tone sounds and the display shows Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 3
or wait for the telephone user to end the call.
If Phone Call capability is not enabled in your radio, the display
shows
Unavailable
and your radio mutes the call. Your radio
returns to the previous screen when the call ends.
Phone Call as All Call
Procedure:
When you receive a Phone Call as an All Call:
1 The Phone Call icon appears in the top right corner. The
display shows All Call and Phone Call.
2 Press the PTT button to talk and release to listen.
3 Press d to end the call.
The display shows Ending Phone Call.
4 If successful:
A tone sounds and the display shows All Call and
Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 3
or wait for the telephone user to end the call.
If Phone Call capability is not enabled in your radio, the display
shows
Unavailable
and your radio mutes the call. Your radio
returns to the previous screen when the call ends.
NOTE: When you receive a Phone Call as an All Call, you can
respond to the call or end the call, only if an All Call
type is assigned to the channel.
LKP_APAC.book Page 25 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...