English
80
5 The display shows the date and time of the latest software
update.
See Over-the-Air Programming (OTAP) on page 68 for details
on OTAP.
Software Update menu is only available after at least one
successful OTAP session.
RSSI Values
Your radio shows the Received Signal Strength Indicator (RSSI)
icon at the top of your display. This feature allows you to view
the RSSI values.
Procedure:
When you are on the Home screen:
1 Press < three times (<-<-<) and immediately
press
> three times (>->->), all within 5
seconds.
2 The display shows the current RSSI values.
Long press the d button to return to the Home screen.
See Display Icons on page 14 for details on the RSSI icon.
Front Panel Programming (FPP)
Your radio is able to customize certain feature parameters to
enhance the use of your radio.
Entering FPP Mode
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Program Radio and press e to select.
NOTE: Long press
d at any time to return to the Home
screen.
Editing FPP Mode Parameters
Use the following buttons as required while navigating through
the feature parameters.
<, > – Scroll through options, increase/decrease values,
or navigate vertically.
e – Select the option or enter a sub-menu.
d – Short-press to return to previous menu or to exit the
selection screen. Long-press to return to Home screen.
LKP_APAC.book Page 80 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...