English
74
Turning the LED Indicator On or Off
You can enable and disable the LED Indicator if needed.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to LED Indicator and press e to select.
5 Press e to enable LED indicator. The display shows 9
beside Enabled.
OR
Press
e to disable LED indicator. The 9 disappears from
beside Enabled.
The display backlight, and buttons backlighting are
automatically turned off if the LED indicator is disabled (see
Controlling the Display Backlight on page 72).
NOTE: At Step 4, you can also use < or > to change the
selected option.
Turning the Voice Operating Transmission (VOX)
Feature On or Off
This feature allows you to initiate a hands-free voice activated
call on a programmed channel. The radio automatically
transmits, for a programmed period, whenever the microphone
on the VOX-capable accessory detects voice.
Pressing the PTT button during radio operation will disable
VOX. To re-enable VOX, do one of the following:
• Turn the radio off and power it on again, OR
• Change the channel via the Channel Selector Knob, OR
• Follow the procedure below.
NOTE: Turning this feature on or off is limited to radios with
this function enabled. Check with your dealer or system
administrator for more information.
Procedure:
Press the programmed VOX button to toggle the feature on or
off.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
LKP_APAC.book Page 74 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...