Advanced Features
English
48
Making a Call Alert with the One Touch Access
Button
Procedure:
1 Press the programmed One Touch Access button to make
a Call Alert to the predefined alias or ID.
2 The display shows Call Alert and the subscriber alias or
ID, indicating that the Call Alert has been sent.
3 The LED lights up solid green when your radio is sending
the Call Alert.
4 If the Call Alert acknowledgement is received, the display
shows positive mini notice.
OR
If the Call Alert acknowledgement is not received, the
display shows negative mini notice.
Emergency Operation
An Emergency Alarm is used to indicate a critical situation. You
are able to initiate an Emergency at any time on any screen
display even when there is activity on the current channel.
Your dealer can set the duration of a button press for the
programmed Emergency button, except for long press, which is
similar with all other buttons:
• Short press – Between 0.05 seconds and 0.75 seconds
• Long press – Between 1.00 second and 3.75 seconds
The programmed Emergency button is assigned with the
Emergency On/Off feature. Check with your dealer for the
assigned operation of the Emergency button.
If short press the programmed Emergency button is assigned
to turn on the Emergency mode, then long press the
programmed Emergency button is assigned to exit the
Emergency mode.
If long press the programmed Emergency button is assigned to
turn on the Emergency mode, then short press the programmed
Emergency button is assigned to exit the Emergency mode.
NOTE: Side Button 1 or Side Button 2 can be programmed as
the Emergency Button.
LKP_APAC.book Page 48 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...