English
69
Utilities
Turning the Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts (except
for the incoming Emergency alert tone) if needed.
Procedure:
Press the programmed All Tones/Alerts button to toggle all
tones on or off.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Tones/Alerts and press e to select.
5 < or > to All Tones and press e to select.
6 Press e to enable all tones. The display shows 9 beside
Enabled.
OR
Press
e to disable all tones. The 9 disappears from beside
Enabled.
NOTE: At Step 5, you can also use
< or > to change the
selected option.
Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if needed.
This feature adjusts the volume of the tones/alerts, allowing it to
be higher or lower than the voice volume.
Procedure:
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Tones/Alerts and press e to select.
5 < or > to Vol. Offset and press e to select.
6 < or > to the required volume value. The radio
sounds a feedback tone with each corresponding volume
value.
7 Press e to keep the required displayed volume value.
OR
Repeat Step 6 to select another volume value.
OR
d to exit without changing the current volume offset
settings.
LKP_APAC.book Page 69 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...