English
62
Procedure:
Press the programmed Privacy button to toggle privacy on or
off.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Utilities and press e to select.
3 < or > to Radio Settings and press e to select.
4 < or > to Privacy.
5 Press e to enable Privacy. The display shows 9 beside
Enabled.
OR
Press
e to disable Privacy. The 9 disappears from beside
Enabled.
If the radio has a privacy type assigned, secure or unsecure
icon appears on the status bar, except when the radio is
sending or receiving an Emergency call or alarm.
NOTE: At Step 4, you can also use
< or > to change the
selected option.
Security
You can enable or disable any radio in the system. For
example, you might want to disable a stolen radio, to prevent
the thief from using it, and enable that radio, when it is
recovered.
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled. Check with your
dealer or system administrator for more information.
Radio Disable
Procedure:
Use the programmed Radio Disable button.
1 Press the programmed Radio Disable button.
2 < or >to the required alias or ID and press e to
select.
3 The display shows transitional mini notice, indicating the
request is in progress. The LED blinks green.
4 Wait for acknowledgment.
5 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
LKP_APAC.book Page 62 Wednesday, July 18, 2012 11:01 AM
To Next Page
Loading...