Identifying Radio Controls
English
13
Switching Between Conventional Analog and
Digital Mode
Each channel in your radio can be configured as a conventional
analog or conventional digital channel. Use the Channel
Selector Knob to switch between an analog or a digital channel.
When switching from digital to analog mode, certain features
are unavailable. Icons for the digital features (such as
Messages) reflect this change by appearing ‘grayed out’.
Disabled features are hidden in the menu.
Your radio also has features available in both analog and digital
mode. However, the minor differences in the way each feature
works does NOT affect the performance of your radio.
Your radio also switches between digital and analog modes
during a dual mode scan (see Scan on page 37).
Identifying Status Indicators
Your radio indicates its operational status through the following:
Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Call Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15
Advanced Menu Icons . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Mini Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Sent Item Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17
Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19
Channel
Selector
Knob
LKP_APAC.book Page 13 Wednesday, July 18, 2012 11:01 AM