English
54
Managing Fail-to-Send Text Messages
You can select one of the following options while at the Resend
option screen:
• Resend
• Forward
• Edit
NOTE: If the channel type (i.e. conventional digital) is not a
match, you can only edit and forward a Fail-to-Send
message.
Resending a Text Message
Procedure:
1 Press e to resend the same message to send to the same
subscriber/group alias or ID.
2 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Forwarding a Text Message
Select Forward to send the message to another subscriber/
group alias or ID.
Procedure:
1 < or > to Forward and press e to select.
2 < or > to the required alias or ID and press e to
select.
3 The display shows transitional mini notice, confirming your
message is being sent.
4 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
LKP_APAC.book Page 54 Wednesday, July 18, 2012 11:01 AM